HT-HR – Humidity & Temperature Data Logger

Product Details

The HT-HR is a small Dual Channel High Resolution (16 bit) Humidity and Temperature data logger housed in a rugged 304 stainless steel case. The humidity and temperature sensors are housed in a 60 micron Stainless Steel filter at the top of the logger. The HT-HR mark 4 uses a Sensirion SHT15 humidity sensor giving ±2.0%RH accuracy from 10%RH to 90%RH.

The logger contains an integral internal temperature sensor which is logged separately to humidity.

Logging can be configured to: start on time, immediate start, start on condition, stop when full, loop around (overwrite oldest data).

 Features

• Temperature & Humidity can be set to any combination of Point, Average, Maximum & Minimum readings.
• The data from any logger that records Temperature and Relative Humidity can be processed, by the Omni7 software, to add Absolute Humidity and/or Dew Point readings to the data.
• The logger can be set to log Humidity only, Temperature only or both Humidity and Temperature.
• The battery voltage of the logger can be logged if required.
• The logger can be run in either “Stop when memory is Full”, “Loop Around” mode or set to stop at a future time.
• The logger can be started “Now” or started at a given time in the future.
• The data from any logger that records Temperature can be processed, by the Omni7 software, to give daily, weekly and monthly accumulated Grow Degree Day reports for a wide range of horticultural crops.

A DLC3USB [USB] download cable (2m) is required to connect the HT-HR to a computer.