EN
ES
Input Types:
- Thermocouple B, E, J, K, N, R, S, T
- RTD Pt100 and Pt1000
- For RTD and Thermocouple; Output is Linear with Temperature
- DC: mA, mV and V
- Potentiometer
- 32 point curve fitter for mA, mV, V inputs
XU2 – Thermocouple Input Transmitter (Processor)
2 Wire, USB Programmable, Isolating, Universal Input Single Transmitter
XU2 Features
- Programmable via USB (requires the XU-USB programming key)
- No power supply or calibration required during programming
- Multiple input types
- Input to output isolation 3750Vac
- High accuracy 0.1%
- Reverse polarity protection
- Heartbeat status LED
- Zero adjust pot
- Offset available via XU software
- Case temperature range -20~80°C
- Compact DIN rail mount enclosure
- Easy to install
Brand: INTECH
Usually in stock
Request a quoteScroll down for product range
| TYPE | XU2 |
| Output | 2 wire 4~20mA loop powered |
| Power Supply | 10.5~36Vdc |
| Supply Voltage Sensitivity | < ±0.005%/V FSO |
| Output Load Resistance | 700Ω at 24Vdc (50Ω/V above 10.5Vdc) |
| Maximum Output Current | Limited to <28mA (Emission and Immunity) |
| Emissions Compliance | EMC EN 61326 |
| Immunity Compliance | EMC EN 61326 |
| Safety Compliance | EMC EN 61010-1 |
| Accurate to | <±0.03% FSO Typical |
| Ambient Drift | <±0.003%/°C FSO Typical |
| Noise Immunity | 125dB CMRR Average (2.0kVdc Limit) |
| R.F. Immunity | <1% effect FSO Typical |
| Isolation Test Voltages | Between Input and Output: 3750Vac for 1min |
| Response Time | 400msec Typical (10~90% 300msec Typical) |
| Sensor Fail | Low 3.8mA, High 21mA |
| Startup Time | 3 seconds, 3.7mA output |
| Output calibrate via Pot | ±0.5mA Zero offset adjust |
| Operating Temperature | -20°C~85°C |
| Storage Temperature | -20°C~100°C |
| Operating Humidity | 5~85%RH Max (Non-Condensing) |
| Mounting | 35mm Symmetrical DIN Rail |
| Dimensions | H=79, W=20, D=68mm |
| Voltage Input Specifications | |
| USB Programmable Zero | 0~±99% of the Span |
| USB Programmable Span | ±100mVdc to ±10Vdc and Bipolar |
| Minimum Input Resistance | 300kΩ |
| mV Maximum Over-range | 3Vdc Continuous |
| V Maximum Over-range | 60Vdc Continuous |
| Linearity and Repeatability | <±0.02% FSO Typical |
| WARNING: Do NOT apply a V input greater than 3V to mV terminals! | |
| Current Input Specifications | |
| USB Programmable Zero | 0~±99% of the Span |
| USB Programmable Span | 1µAdc~24mAdc Standard Range = 4~20mA |
| Minimum Recommended Span | 0~1mA (gives 1000 steps on output) |
| Input Resistance | 10Ω |
| Maximum Over-range | 50mAdc Continuous |
| Linearity and Repeatability | <±0.02% FSO Typical |
| Thermocouple (T/C) Input Specifications | |
| Thermocouple Types | B, E, J, K, N, R, S, T |
| USB Programmable Zero | 0~±99% of the Span |
| USB Programmable Span | Within Thermocouple Type limits |
| Input Impedance | 1MΩ Minimum |
| T/C Lead Resistance | 100Ω Maximum |
| Cold Junction Comp | -20°C~90°C |
| Accuracy | E, J, K, N, T <±1°C B, R, S <±2°C |
| Temperature Drift | E, J, K, N, T <±0.05°C B, R, S <±0.2°C |
| CJC Error | <±1°C |
| Sensor Break Output Drive | Funct High Upscale Funct Low Downscale |
| RTD Input Specifications | |
| RTD Input | Pt100 or Pt1000 DIN 3-wire Type (2-wire can be used with offset calibration) |
| Sensor Current | 0.15mA Nominal |
| Lead Wire Resistance | Pt100: 10Ω/wire Maximum Pt1000:5Ω/wire Maximum 0.02% FSO Offset Error per Ω of Lead Resistance |
| USB Programmable Zero | 0~±99% of the Span |
| USB Programmable Span | -200°C~850°C |
| Sensor Break Output Drive | Funct High Upscale Funct Low Downscale |
| Linearity (Pt100) | 0.02% FSO for Span Inputs ≤200°C. 0.1% FSO for Span Inputs ≤850°C |
| Linearity (Pt1000) | 0.02% FSO for Span Inputs ≤200°C, 0.2% FSO for Span Inputs ≤520°C |
| Potentiometer Input Specifications | |
| Potentiometer Input | 3-wire Potentiometer |
| Excitation Voltage | 1.2Vdc |
| Potentiometer Resistance | Low Range 1K~2KΩ High Range 5K~1MΩ |
| USB Programmable Zero | 0~90% of the Span |
| USB Programmable Span | 0.1~100% |
| Linearity and Repeatability | <±0.02% FSO Typical |
| ITEMS | CODE | DESCRIPTION | |||
| SERIES | XU2- | Universal Input Transmitter | |||
| Type of Input | Pt100- | RTD Pt100 DIN | |||
| Pt1000- | RTD Pt1000 DIN | ||||
| Tc (Type)- | Thermocouple Type; B, E, J, K, N, R, S, T | ||||
| mA- | mA Input impedance = 10Ω | ||||
| mV- | mV Input resistance = 300KΩ | ||||
| V- | V Input resistance = 300KΩ | ||||
| Pot 1- | Potentiometer Low = 1K~2KΩ | ||||
| Pot 2- | Potentiometer High = 5K~1MΩ | ||||
| Measuring range | – | State Measuring Range | |||
| Output Action on Sensor Fail (for Temperature Input types only) |
US | Upscale | |||
| DS | Downscale | ||||
Ordering Example:
* XU2-Pt100-0~100C-DS = XU2; RTD Pt100 DIN 0~100°C Input; Downscale; 4~20mA Output.
* XU2-Tc K-0~1200C-US = XU2; Thermocouple Type K 0~1200°C Input; Upscale; 4~20mA Output.
Download XU Programming Software
Note: Requires the XU-USB Programming Key
Product Range
| Code | Specifications | Price | Quantity | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| XU2-Tc K-0~1200C-US | XU2; Thermocouple Type K 0°C~1200°C Input; Upscale; 4~20mA Output | $255.00 | |||||||||
| XU-USB_6 | USB Programming cable – used to set up different ranges. | $120.00 | |||||||||
Other ranges available on request
All prices are in NZ$, and GST exclusive and are subject to change without notice.Intech is our own brand of products, for all aftersales and technically support please contact us.
Not sure what you need? Ask us anything!
