Intech PI-F Frequency to DC Transmitter
PI-F $695.00 Excl. GST
Back to products
Intech PI-P Potentiometer to DC Transmitter
PI-P $572.00 Excl. GST
Intech TWI-FF/TWN-FF Frequency to Frequency Transmitters
Click to enlarge

TWI-FF / TWN-FF – Frequency to Frequency Transmitters

Brand:

$355.00 Excl. GST

Total: $355.00

All prices are in NZ$, and GST exclusive and are subject to change without notice.

Product Details

Description

The TWN-FF & TWI-FF are designed as an interface between a Flomec DP490 Flow Transducer and a PLC. The TWN-FF & TWI-FF divide the frequency of the pulses from a DP490 to an output frequency a PLC can Register without missing counts.

For example, if a DP490 is measuring flow that results in an output frequency of 40Hz, and the maximum PLC input frequency is 10Hz, the TWN-FF & TWI-FF would be ordered with a division factor of four.

The TWN-FF & TWI-FF can be powered by the PLC’s 24Vdc power supply. The output is a 50:50 mark space ratio, and can be directly connected into most PLC digital inputs.

TWI-FF \ TWN-FF Features

  • Frequency I/P divided to a frequency output
  • LED indication of frequency output
  • Isolated input to output 1.6kV for TWI-FF
  • Easy to install
  • Compact DIN rail mount enclosure
  • Reverse polarity protection
  • Externally accessible span and zero adjustments

Technical Specs

TYPETWI-FF
InputMaximum Range100kHz (5V p-p input)
Triggerlevel 2.5Vdc
Amplitude5~30Vdc Squarewave
OutputMaximumRange 5kHz
FunctionSquarewave Output; 50:50 Mark / Space Ratio
Sink/SourceAmplitude(Power Supply) - 2V (No Load)
LoadLimited to Sink / Source 100mA @ 24Vdc (50mA @ 12Vdc)
Maximum load = 100mA @ 24Vdc
Suitable for most optocoupler inputs
Open Collector30Vdc, 100mA Max
Other variations available on request
Isolation Test Voltage (TWI-FF Only)Input to Output 1600Vdc for 1 min
Power Supply11~28Vdc
Current Usage15mA (No Output Load)
EMC CompliancesEmissions EN 55022-A. Immunity EN 50082-1, <1% Effect FSO Typical
Operating Temperature & Humidity0°C~70°C (Storage Temp -20°C~80°C) 5~85% RH Max, Non-Condensing
Dimensions and ConstructionL=79, W=22.5, H=85mm Polyamide Thermoplastic Rail Mount

Documents