|Accuracy ( 23 ± 5ºC)||0.2% ro + 0.3|
|Stability||Maximum 100ppm / °C, less 0.2% drift per year typically|
|Input burden||Current 0.3VA typically, voltage 0.2VA typically|
|Maximum input over||Current related input : 2 x rated continuous, 10 x rated 10 sec, 25 x rated 2 sec, 50 x rated 1 sec
Voltage related input : maximum 2 x rated continuous ( 120V / 240V ), maximum 1.5 x rated continuous ( 415V )
|Output load||DC current mode : maximum 10V drop
DC voltage mode : maximum 5mA drive
|Response & ripple||< 400ms for step change 0-95%, ripple less 0.5% ro peak-peak|
|Magnetic effect||< 0.05% change 1M center 100 ampere-turn, synchronized with line frequency|
|Aux. power effect||< 0.005% for per voltage change|
|Dielectric strength||4KV AC rms 1 minute between terminals to case IEC 688
2KV AC rms 1 minute between input / output / power IEC 688
|Impulse / SWC||IEC 255-4, 5KV 1.2x50us, IEC255-22-1, 2.5KV ( 1MHz / 400Hz )|
|Operating condition||-5°C~60°C, 20 to 99% RH non condensing|
|Storage condition||-20°C~70°C, 20 to 99% RH non condensing|
|Radio screening||RFI degree N complies with VDE 0875|
|Enclosure code||Case IP 50 / terminals IP 30, complies with IEC 529, BS 5490 DIN 40050|
|Power supply||AC 120V / 240V ±15%, 50 / 60Hz, < 3.5W|
RPPF – Power Factor Transducer
415V Input, 0-5-10Vdc Output, 240Vac Power Supply.
- Compliance: IEC 688
- Power transducers
- Measuring & conversion
- Dielectric Strength
- Impulse test
- Surge test
Request a quote
Usually in stock
Scroll down for product range
415V Input, 0-5-10Vdc Output, 240Vac Power Supply
Other ranges available on request.All prices are in NZ$, and GST exclusive and are subject to change without notice.
Intech Instruments Ltd are New Zealand distributors for Hsiang Cheng Electric Corp. products. Please contact the Hsiang Cheng Electric Corp. distributor in your country if you require sales or service support for Hsiang Cheng Electric Corp. products.
Not sure what you need? Ask us anything!