LPI-D – DC Transmitter

Name: LPI-D
Brand: Intech
SKU: 11544
Price: 297.00 NZD
Availability: InStock

Brand: Intech

$297.00 Excl. GST

All prices are in NZ$, and GST exclusive and are subject to change without notice.

Request a quote

Product Details

Field programmable Bi-Polar input ranges (Model P)
Isolated input to output 2.0kV
High accuracy
40~200mV output test signal
LED indication of loop current
Easy to install
Compact DIN rail mount enclosure
Available standard or special calibration
Reverse polarity protection
LPI-D-F: Fixed input ranges available: 4~20mA, 0~20mA, 0~5Vdc, 1~5Vdc, 2~10Vdc, 0~10Vdc.
LPI-D-P: Field Programmable input ranges from 0~10mV to 150V and from 0~200uA to 100mA.

TYPE	LPI-D
Input	Voltage	10mVdc to 150Vdc and Bipolar (LPI-D-P is Field Programmable)
		Min Input Resistance = 200kΩ
		Max Over-range = 170Vdc Continuous
	Current	200µAdc to 100mAdc and Bipolar (LPI-D-P is Field Programmable)
		Input Resistance = 25Ω
		Max Overange = 120mAdc Continuous
	Damping	3 Second Selectable with H1 (LPI-D-P Only)
Output	mA	2 wire 4~20mA (Loop Powered)
	mV Test	40~200mV ±1% @ 4~20mA, Other Test Voltages Available e.g. 1~5V Note: mV Test Increases Power Supply & Decreases Load Resistance
Power Supply		8~33Vdc
Supply Voltage Sensitivity		<±0.005%/V FSO
Output Load Resistance		800Ω @ 24Vdc (50Ω/V Above 8Vdc)
Maximum Output Current		Limited to <28mA
Accurate to		<±0.1% FSO Typical
Linearity & Repeatability		<±0.1% FSO Typical
Ambient Drift		<±0.02%/C FSO Typical
Noise Immunity		125dB CMRR Average (2.0kVac RMS Limit)
EMC Compliances		Emissions EN 55022-A, Immunity EN 50082-1, <1% Effect FSO Typical
Isolation Test Voltages		2000Vac/dc Input to Output for 1min
Response Time		200msec Typical (10 to 90% 50msec Typical)
Operating Temperature		0°C~70°C
Storage Temperature		-20°C~80°C
Operating Humidity		5~85%RH Max, Non-Condensing
Dimensions and Construction		L=79, W=22.5, H=85mm. Polyamide Thermoplastic Rail Mount Enclosure