XU2 – Universal Input Transmitter

Brand:

$265.00 Excl. GST

Model *

Input Type *

Thermocouple Type *

Input Range RTD *

Input Range Thermocouple *

Input Range mA *

Input Range mV *

Input Range V *

Input Range Potentiometer *

Custom range*

Output *

Optional Programming Key

Total: $265.00

All prices are in NZ$, and GST exclusive and are subject to change without notice.

Product Details

Description

This versatile 2-wire transmitter accepts a range of standard input types, and outputs a 4-20mA loop.

Key Features:

  • Programmable via USB (requires the XU-USB programming key)
  • No power supply or calibration required during programming
  • Multiple input types
  • Input to output isolation 3750Vac
  • High accuracy 0.1%
  • Reverse polarity protection
  • Heartbeat status LED
  • Zero adjust pot
  • Offset available via XU software
  • Case temperature range -20°C to +80°C
  • Compact DIN rail mount enclosure
  • Easy to install

Input Types:

  • Thermocouple B, E, J, K, N, R, S, T
  • RTD Pt100 and Pt1000
  • For RTD and Thermocouple; Output is Linear with Temperature
  • DC: mA, mV and V
  • Potentiometer
  • 32 point curve fitter for mA, mV, V inputs

Technical Specs

TYPEXU2
Output2 wire 4~20mA loop powered
Power Supply 10.5~36Vdc
Supply Voltage Sensitivity< ±0.005%/V FSO
Output Load Resistance 700Ω at 24Vdc (50Ω/V above 10.5Vdc)
Maximum Output CurrentLimited to <28mA (Emission and Immunity)
Emissions ComplianceEMC EN 61326
Immunity Compliance EMC EN 61326
Safety ComplianceEMC EN 61010-1
Accurate to<±0.03% FSO Typical
Ambient Drift <±0.003%/°C FSO Typical
Noise Immunity125dB CMRR Average (2.0kVdc Limit)
R.F. Immunity<1% effect FSO Typical
Isolation Test VoltagesBetween Input and Output: 3750Vac for 1min
Response Time400msec Typical (10~90% 300msec Typical)
Sensor FailLow 3.8mA, High 21mA
Startup Time3 seconds, 3.7mA output
Output calibrate via Pot±0.5mA Zero offset adjust
Operating Temperature -20°C~85°C
Storage Temperature-20°C~100°C
Operating Humidity5~85%RH Max (Non-Condensing)
Mounting35mm Symmetrical DIN Rail
Dimensions H=79, W=20, D=68mm 
Voltage Input Specifications
USB Programmable Zero0~±99% of the Span
USB Programmable Span±100mVdc to ±10Vdc and Bipolar
Minimum Input Resistance300kΩ
mV Maximum Over-range3Vdc Continuous
V Maximum Over-range60Vdc Continuous
Linearity and Repeatability <±0.02% FSO Typical
WARNING: Do NOT apply a V input greater than 3V to mV terminals!
Current Input Specifications
USB Programmable Zero 0~±99% of the Span
USB Programmable Span1µAdc~24mAdc
Standard Range = 4~20mA
Minimum Recommended Span0~1mA (gives 1000 steps on output)
Input Resistance10Ω
Maximum Over-range50mAdc Continuous
Linearity and Repeatability<±0.02% FSO Typical 
Thermocouple (T/C) Input Specifications
Thermocouple TypesB, E, J, K, N, R, S, T
USB Programmable Zero0~±99% of the Span
USB Programmable SpanWithin Thermocouple Type limits
Input Impedance1MΩ Minimum
T/C Lead Resistance100Ω Maximum
Cold Junction Comp-20°C~90°C
AccuracyE, J, K, N, T <±1°C
B, R, S <±2°C
Temperature DriftE, J, K, N, T <±0.05°C
B, R, S <±0.2°C
CJC Error<±1°C
Sensor Break Output DriveFunct High Upscale Funct Low Downscale 
RTD Input Specifications
RTD Input Pt100 or Pt1000 DIN 3-wire Type (2-wire can be used with offset calibration)
Sensor Current0.15mA Nominal
Lead Wire ResistancePt100: 10Ω/wire Maximum
Pt1000:5Ω/wire Maximum
0.02% FSO Offset Error per Ω of Lead Resistance
USB Programmable Zero0~±99% of the Span
USB Programmable Span-200°C~850°C
Sensor Break Output DriveFunct High Upscale Funct Low Downscale
Linearity (Pt100)0.02% FSO for Span Inputs ≤200°C. 0.1% FSO for Span Inputs ≤850°C
Linearity (Pt1000)0.02% FSO for Span Inputs ≤200°C, 0.2% FSO for Span Inputs ≤520°C
Potentiometer Input Specifications
Potentiometer Input3-wire Potentiometer
Excitation Voltage1.2Vdc
Potentiometer ResistanceLow Range 1K~2KΩ
High Range 5K~1MΩ
USB Programmable Zero0~90% of the Span
USB Programmable Span0.1~100%
Linearity and Repeatability<±0.02% FSO Typical 

Ordering Information

ITEMS   CODE  DESCRIPTION
SERIES XU2- Universal Input Transmitter
Type of Input Pt100- RTD Pt100 DIN
Pt1000- RTD Pt1000 DIN
Tc (Type)- Thermocouple Type; B, E, J, K, N, R, S, T
mA- mA Input impedance = 10Ω
mV- mV Input resistance = 300KΩ
V- V Input resistance = 300KΩ
Pot 1- Potentiometer Low = 1K~2KΩ
Pot 2- Potentiometer High = 5K~1MΩ
Measuring range State Measuring Range
Output Action on Sensor Fail
(for Temperature Input types only)
US Upscale
DS Downscale

Ordering Example:

* XU2-Pt100-0~100C-DS =  XU2; RTD Pt100 DIN 0~100°C Input; Downscale; 4~20mA Output.

* XU2-Tc K-0~1200C-US = XU2; Thermocouple Type K 0~1200°C Input; Upscale; 4~20mA Output.

Software

Smart, simple software to program your XU products

Download XU Programming Software

Note: Requires the XU-USB Programming Key

Documents