EN
ES
Description:
ZigBee® is a specification for a suite of high level communication protocols using small, low-power digital radios based on the IEEE 802.15.4-2006 standard for wireless personal area networks (WPANs).
ZigBee® is targeted at radio-frequency (RF) applications that require a low data rate, secure networking, and low power consumption, especially for the battery powered Z-2400-Sleeper modules.
The Z-2400 Series operate with the user friendly MicroScan SCADA (Version 5.1 or later) software.
If you are looking for wireless monitoring and/or remote control solutions, the Z-2400 modules may be the answer.
Z-2400 devices have the ability to form a mesh network between modules. This technique allows the short range of an individual module to be expanded and multiplied, covering a much larger area.
When the mesh network discovers a new Z-2400 module, it will automatically incorporate it into the current network. If a node malfunctions, the mesh network will route the data through an alternate path using another node.
Ideal for laboratories, Hospitals, Industry and Utilities!
Typical Applications
- Laboratories
- Hospitals
- Industry
- Utilities
Common Specifications:
- Wireless standard: IEEE 802.15.4-2006.
- Wireless range: 100m typical line of sight with included whip.
- Wireless Frequency: 2405~2485MHz.
- Frequency Hopping: 15 Channels.
- Power supply: 9~36Vdc.
- Power Consumption: 5 VA.
ZigBee® Technology empowers the Intech MicroScan
Example schematic showing MicroScan Software and the 2400-A16 Remote Station plus Sleeper for mobile monitoring.
| Model | Description and Features |
|---|---|
| Z-2400-RB-T Base or Remote Module | Communications: RS232, RS422, RS485. |
| Wireless Power: 100mW. | |
| Duty: Configurable as Base or Remote. Comms Converters when using as Base. | |
| Embedded protocol support: MicroScan default ASCII. | |
| Z-2400-TCP-T Ethernet Base Module | Communications: Ethernet TCP/IP. |
| Wireless Power: 100mW. | |
| Duty: Base only. | |
| Embedded protocol support: MicroScan TCP. | |
| Z-2400-A2I Input Module (Set as MicroScan mode.) | Universal channel data inputs: 2. |
| Inputs: RTD/Tc/mV/V/mA/Pseudo Digital. | |
| Digital inputs: 4x 0~1Hz. | |
| Digital outputs: 2x 30Vdc, 1A max. | |
| Relay outputs: 2x 250Vac/30Vdc, 5A max. | |
| Wireless Power: 100mW. | |
| Z-2400-Sleeper Sleeper Module | Universal channel data inputs: 2 Inputs: RTD/Tc/mV/V/mA/Pseudo Digital. |
| Selectable update rate: 1,2,5,15,30,60 minutes. | |
| Wireless Power: 1mW. | |
| Embedded protocol support: MicroScan default ASCII. | |
| Battery life: Approx 2 years life when wake up interval set to 2 minutes. | |
| Poor signal strength reduces battery life. | |
| Option to permanently power with plug pack power supply. | |
| Z-2400-T Powered Sleeper Sleeper Turbo Module | Universal channel data inputs: 2 Inputs: RTD/Tc/mV/V/mA/Pseudo Digital. |
| Selectable update rate: 1, 2, 5, 15, 30, 60 minutes | |
| Wireless Power: 100mW | |
| Embedded protocol support: MicroScan ASCII |
|
| Internal battery for intermittent mains power failure. | |
| Battery life: Approx 2 months of intermittent use. (Must be permanently powered - plug pack power supply - included) |
|
| Z-2400-BAT | Replacement battery for Z-2400-Sleeper. |
| XU-USB | USB Programming Key for programming Z-2400-Sleeper using XU Software. |
| (Same Key as used for programming XU Series transmitters, 2400-A16, Z-2400-A2 Series, IN-uP4 and uP4-Din). | |
| PSW-10-F | Instrument Quality 24Vdc Power Supply for the Z-2400 Series: |
| Output Voltage: 24Vdc | |
| Max Current: 1 Amp continuous | |
| Input Power Supply: 100~264Vac |
See all our Antenna Options (Used when greater distances are involved).
