Intech LPN-LUX Light Intensity Transmitter
LPN-LUX $257.00 Excl. GST
Back to products
Intech XU2HN RTD In head Transmitter
XU2HN $126.00 Excl. GST
Intech LPI-P Potentiometer to DC Transmitter
Click to enlarge

LPI-P – Potentiometer Transmitter

Brand:

$406.00 Excl. GST

Input Range *

Potentiometer to DC Isolating Transmitter

Total: $406.00

All prices are in NZ$, and GST exclusive and are subject to change without notice.

Product Details

LPI-P Features

  • Field programmable input ranges
  • Isolated input to output 2.0kV
  • High accuracy
  • 40~200mV output test signal
  • LED indication of loop current
  • Selectable 3 second input damping
  • Easy to install
  • Compact DIN rail mount enclosure
  • Available standard or special calibration
  • Reverse polarity protection

Technical Specs

TYPELPI-P
Potentiometer Input3 Wire Potentiometer
Excitation = 0.25V
Min Potentiometer Resistance = 1kΩ
Max Potentiometer Resistance = 1MΩ
Field Programmable Zero From 0 to 100%
Field Programmable Span From 0 to 100%
Damping: 3 Second Selectable with H1
OutputmA2 wire 4~20mA (Loop Powered)
mV Test40~200mV ±1% @ 4~20mA, Other Test Voltages Available, e.g. 1~5V
Note: mV Test Increases Power Supply & Decreases Load Resistance
Power Supply8~33Vdc
Supply Voltage Sensitivity<±0.005%/V FSO
Output Load Resistance800Ω @ 24Vdc (50Ω/V Above 8Vdc)
Maximum Output CurrentLimited to <28mA
Accurate to<±0.1% FSO Typical
Linearity & Repeatability<±0.1% FSO Typical
Ambient Drift<±0.02%/C FSO Typical
Noise Immunity125dB CMRR Average (2.0KVac RMS Limit)
EMC CompliancesEmissions EN 55022-A, Immunity EN 50082-1, <1% Effect FSO Typical
Isolation Test Voltages2000Vac/dc Input to Output for 1min
Response Time200msec Typical (10 to 90% 50msec Typical)
Operating Temperature0°C~70°C
Storage Temperature-20°C~80°C
Operating Humidity5~85%RH Max, Non-Condensing
Dimensions and ConstructionL=79, W=22.5, H=85mm Polyamide Thermoplastic Rail Mount Enclosure

Documents