DELOS SI - Precision pressure transmitter with switching contacts and display:

Product Specifications:

Download Datasheet

Download Operating Manual

Download NZ Catalogue Page



The high-precision, electronic pressure switch JUMO DELOS SI provides flexible application due to its switching outputs, analogue output and an LC display to visualise the process pressure and switching contact statuses.
Due to its stainless steel housing and the seal-less measuring system, it is also perfectly suitable for use in hygienically sensible areas.
A variant of this system in a high-temperature design resistant to temperatures of up to 200°C can be used especially for measuring tasks on hot media and lines. The configuration of the output signal and the measuring range can be customised.


  • Linearity 0.1%
  • Measuring range scaling 1 : 4
  • Two-colour display with alarm function
  • Analogue output can be freely configured
  • Span 25~100% of nominal range
  • 100°C medium temperature
  • Programming is either local or via set-up
  • JUMO Datasheet; 40.5052

Ordering Information:

Please Note: Intech Instruments Ltd are the New Zealand distributor for JUMO products.
Please contact the JUMO distributor in your country if you require sales or service support for JUMO products.

DELOS SI Precision pressure transmitter with switching contacts and display.
Input Ranges: -1/9bar, 0~1bar, 0~4bar, 0~10bar, 0~25bar (specify)
Other ranges available on request.
Power supply: 12~30Vdc
Protection: IP67
Cable: Angled socket M12x1 with 2m PVC cable (included)
Outputs:1x PNP output + 1x 0(4)~20mA OR 0~10Vdc output (selectable)
Software DELOS SI Setup program (requires Programming Kit below to connect with PC).
Programming Kit PC interface cable including USB/TTL converter and adapter. 40/00456352
AND Connecting cable (Y cable). 40/00507861


Block Structure:

Block Structure