The LPI-pH is a loop powered, isolated, pH Cell input, to 4~20mA output transmitter, with integral RTD Pt100 temperature compensation, and LCD display of 0~14.00pH.
The LPI-pH is the device to choose when a pH probe is installed in a corrosive, damp, high earth current or electrically noisy environment.
The IP67 rating of the transmitter enclosure, together with the corrosion proofed circuit board, give the LPI-pH high immunity to damp and corrosion, allowing it to be mounted close to the pH probe. Having the transmitter close to the pH probe means that the highly sensitive pH probe output signal is amplified and turned into a robust 4~20mA signal before noise exposure from long cable runs can effect it.
The unit also features internally accessible, finger adjustable, 15 turn slope and offset adjustments, for easy calibration of the pH sensor, in conjunction with the LCD Display.
The 4~20mA output from the LPI-pH can be run for long distances to better environments where standard process controllers can be used safely.
The LPI-pH fills a niche where it has often been necessary to install low IP rated, dedicated pH instruments in an aggressive environment.
|Standard Unit: 0~14pH In, 4~20mA Out, with LCD.|
pH probes for use with the LPI-pH can also be ordered from Intech Instruments Ltd (for the best possible accuracy with the LPI-pH, we recommend using a pH probe that includes a RTD Pt100 sensor).