EPM 7100 power quality meters are conceptualized to revolutionize the traditional power metering industry. Each power quality meter is a compact, electronically advanced and programmable multi-display metering device (MDMD). It is the solution to the new electrical generation.
EPM7100 – Power Quality Meter
Multifunction Power Meter
- Designed for factory and building automation
- Modbus® RTU protocol
- Maximum 580V
- True RMS conversion
- LCD display
- Field programmable PT / CT ratio
- Accuracy up to 0.2%
- Memory for all setup and energy data
- Comprehensive self test diagnostics
- Low input burden 0.2VA (5A/120V)
- Wide power supply range 80~260V AC / DC
- Compact physical configuration
- Compatible for DIN&ANSI cutout
- 2KV RMS input / power isolation
Brand: HCE
Usually in stock
Request a quoteScroll down for product range
Input |
Range |
Voltage : 10-580V |
Current : Suitable for CT secondary rating (option) |
Maximum 6A for 5A rating |
Maximum 1.2A for 1A rating |
Frequency : 40-70 Hz |
Burden |
Voltage < 0.5VA at 580V |
Current < 0.2VA at rating |
Overload rating |
Current Voltage |
2 x rated continuous 750V continuous |
10 x rated 30 seconds 1000V 10 seconds |
25 x rated 2 seconds 1200V 3 seconds |
50 x rated 1 second |
Measured system |
Suitable for 3 phase 4 wires / 3 phase 3 wires |
Select by input wiring & software configuration |
Programmability |
Communication accessible / password lock (for communication) |
System selection : 3 phase 4 wires / 3 phase 3 wires |
PT : 1 - 5000.0 ; CT : 1-5000.0 |
Readout display control 4 digits / auto scan |
Communication Baud rate 1200 / 2400 / 4800 / 9600 / 19200 Address setting 1 - 254 |
Memory : all of energy date and status setting |
Communication port |
RS485 |
Modbus® RTU protocol |
Display |
LCD 0.3” display, 1 rows of “8” digitals |
Dielectric strength |
IEC 255-5 |
2KV AC rms 1 minute between input / power |
Impulse and surge test |
ANSI/IEEE C37.90.1-1989 (3KV) SWC test |
IEC 255-22-1 class SWC test |
IEC 255-22-4 class (IEC 801-4) SWC test |
IEC 255-5 1.2 x 50us (4KV) impulse test |
Stability |
Temperature range -10 to +55°C, maximum 100 ppm/°C |
Long term stability 0.15% drift maximum per year |
Operating condition |
Temperature range -10 to +60°C, RH 20 - 95% |
non-condensed |
Storage condition |
Temperature range -25 to +70°C, RH 20 - 95% |
non-condensed |
Power supply |
AC 80 - 260V, 40 - 70 Hz, DC 80 - 330V |
DC 20 - 60V |
Dissipation maximum 2 VA for AC and 1 Watts for DC |
Mounting / Dimension |
Panel type mounting |
Size : 118 x 96 x 48 mm |
Cut out : 92 x 44 mm |
Product Range
Code | Specifications | Price | Quantity | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
EPM 7100 | Power Quality Meter, 80~260Vac/dc, RS485. | $490.00 | |||||||||
All prices are in NZ$, and GST exclusive and are subject to change without notice.
Intech Instruments Ltd are New Zealand distributors for Hsiang Cheng Electric Corp. products. Please contact the Hsiang Cheng Electric Corp. distributor in your country if you require sales or service support for Hsiang Cheng Electric Corp. products.
Intech Instruments Ltd are New Zealand distributors for Hsiang Cheng Electric Corp. products. Please contact the Hsiang Cheng Electric Corp. distributor in your country if you require sales or service support for Hsiang Cheng Electric Corp. products.
Not sure what you need? Ask us anything!