Weather Sensor Transmitters (4~20mA Outputs):

 

Product Specifications:

Download Sales Brochure / Datasheet

 

Fully Mounted: WS3-WD-TB-CL with THS-CL

Features:

• Sensors are available for monitoring each of the following:
  • Air Temperature.
  • Humidity.
  • Light Energy.
  • Wind Speed.
  • Wind Direction.
• 4~20mA output signals from all sensors (loop powered).
• Fully mounted type is supplied with TBar equipment mounting arm, complete with attachment plate and two 50mm U bolts, ready for mounting to pipe or bolting to posts or buildings.

Description:

Weather Sensor Transmitters are tools for the observation and recording of meteorological data.

The sensors can monitor air temperature, humidity, light energy, wind speed and wind direction.

The output signals from the sensors are industrial standard 4~20mA (loop powered). This allows for easy integration into a SCADA or PLC monitoring system.

Ordering Information:

Individual Sensor Options:

H-CL	Humidity sensor c/w 1.5m cable
T-CL-HS	Temperature HS sensor in Heat shrink pocket c/w 1.5m cable
T-CL-SS	Temperature SS sensor in Stainless Steel penetration probe c/w 1.5m cable
LE-CL	Light energy c/w base mounting plate and 5m cable
WS3-CL	Wind speed (3 cup) c/w 10m cable (1.5m/sec starting speed)
WS6-CL	Wind speed (6 cup) c/w 10m cable (0.45m/sec starting speed)
WD-CL	Wind direction c/w 10m cable
RAIN-CL	0.2mm Rain Gauge (4~20mA output via included PI-F transmitter)
LPN-DP-BAR	Atmospheric Pressure = use our LPN-DP-BAR Pressure Transmitter.
Mounting Options:
LB	L-Bar with attachment plate and two 50mm U bolts
TB	T-Bar with attachment plate and two 50mm U bolts
Shield	Solar Radiation Shield - used for more accurate measurement of temperature and humidity sensors (does not include sensors)

 

Fully Mounted Options:

WS3-WD-TB-CL	Wind speed 3 cup (starting speed = 1.5m/sec), wind direction, mounted on Tbar mounting arm c/w 5m cable.
WS3-WD-LE-TB-CL	Wind speed 3 cup (starting speed = 1.5m/sec), wind direction, light energy, mounted on Tbar mounting arm c/w 5m cable.
Options:
WS6	Fit WS6 (Wind speed 6 cup), instead of WS3 on above Tbar options (used for lower starting speed = 0.45m/sec).
THS-CL	Temperature and Humidity, both in Solar Radiation Shield c/w 5m cable, mounted on the above Tbar options.
LPN-DP-BAR	Atmospheric Pressure, mounted on the above Tbar options.

 

More information on each of the sensors can be found using the following links:

Wind Speed Sensor (Anemometer)

Wind Direction Sensor (Wind Vane)

Light Energy Sensor (Pyranometer)

Temperature Sensor

Humidity Sensor

Atmospheric Pressure (Option to add LPN-DP-BAR)

Solar Radiation Shield (for housing the temperature, humidity and pressure sensors)

L-Bar & T-Bar Equipment Arms (for mounting of the Weather Sensor Transmitters)

Base Mounting Plate (Optional method of attaching to posts or buildings)

 

---