The 2100-R2 16 Channel Relay Output Expansion Module is used in conjunction with the 2100-A16. This allows the 2100-A16 to stand alone as a 16 channel controller / alarm unit. A second 2100-R2 can then be connected to the first 2100-R2, creating a 32 channel controller / alarm unit [supported on 2100-A16 (rev 1.3) only].
The 2100-R2 relay outputs can be used for any combination of control and alarm functions. The control parameters for each of the 16 controllers are downloaded from the user friendly MicroScan Software, and stored in permanent memory on the 2100-A16. These parameters include Setpoint (SV), Switching Differential, Auto / Manual, Manual Output Setting, Dual Action Control, Single Action Control, Heat / Cool, Heat Only, Cool Only.
The 16 controller alarms will operate unaffected by computer power downs, reboots, etc. The relay outputs can also be accessed directly from the Scada.
The 2100-R2 can also be used in conjunction with the 2100-A4 for general purpose alarms, generated by the SCADA.
|2100-R2-X||Standard Unit: 85~264Vac/dc Power Supply. Note: Power supply of 23~90Vdc can be selected.|