MicroScan SCADA2100-A4 - Analogue Input Remote Station:
Product Specifications:
Download Configuration Software
Features:
- 4 Universal Analogue Inputs.
- Each Input Individually Selected & Scaled.
- 12 Bit Resolution.
- Inputs for T/C, mV, V, & mA.
- T/C: E, K, J, N, T, with CJC.
- RTD: -50~140C to -50~850C.
- mV: 0~75mV to 0~300mV.
- V: 0~2.5V to 0~10V.
- mA: 0~10mA to 0~20mA.
- Four Digital, Isolated, Optocoupler Inputs.
- Two 12bit Analogue Outputs.
- A4: Four Digital, Isolated, Relay Outputs.
- A4e: Eight Digital, Isolated, Relay Outputs.
- RS422/RS485 Up to 1200m.
- RS232 Cost Effective Radio Installation.
- RS232 Cost Effective PC or PLC AI Expansion.
- Clock/Reset Drive up to Four 2100-M's.
- Selectable Baud Rates.
- Digital Inputs:
- State or Count.
- Speeds to 50Hz.
- Interface for 2100-R2 (16 Relays) or 2100-ME (Memory - now Discontinued).
- Easy Programming Via MicroScan Maps.
- Programmable Station Number.
- Programmable Relay States - NO or NC.
- Comms Failure Time-out Using Relay 4.
- Comms TXE and TX Delay Programming.
- Programming Information Retained on Power Down.
- Universal AC/DC Power Supply.
- Easy to Install.
- Compact DIN Rail Mount Enclosure.
Description:
The universal inputs plus outputs gives this station a lot of flexibility. I/O include 4 analogue inputs, 4 digital inputs, 4 relay outputs plus optional 2 analogue outputs.
Field programmable inputs include thermocouples, RTD, Pt100, mA, mV & V, thermister.
Each input can be individually programmed and ranged for any span via on Bd links. The analogue inputs on the 2100-A4 can be expanded up to 64 using the 2100-M input Multiplexers. Outputs include 4 relays for control or alarm, plus an option for 2 analogue outputs of 4~20mA or 0~10Vdc.
The 2100-A4 contains 4 in built on/off controllers or alarms. The controller/alarm setpoint (SV) and other parameters are downloaded from the user friendly MicroScan software, Mimic package, and held in permanent memory on the 2100-A4.
Other controller parameters include, output switching differential, auto/manual and manual settings of output. The 4 controllers/alarms on the 2100-A4 will operate unaffected by computer power downs or reboots etc.
Ordering Information:
| 2100-A4-X | Standard Unit: 4 Analogue Inputs Pt100, -50~140C, 4 Digital Inputs, 2 Analogue Outputs 4~20mA. Clock/Reset Outputs, RS485 Comms, 85~264Vac/dc Power Supply. |
| 2100-A4E-X | Standard Unit: 4 Analogue Inputs Pt100, -50~140C, 4 Digital Inputs, 2 Analogue Outputs 4~20mA. Clock/Reset Outputs, 8 Relay Outputs, RS485 Comms, 85~264Vac/dc Power Supply. |
Note 1: The RS232 Comms. version comes complete with a RS232 kit, required for connecting the
2100-AO to a PC, etc. The kit contains: 1 x 5m RS232 cable; (2, 10 & 15m available.) 1 x 9pin D type (25pin D type available).
Note 2: The 2100-A4 is factory set to RS232 or RS422/485. The 2100-A4-X is field selectable for RS422 or RS485, and H or M power supply.
Note 3:
The winery option is not fitted with the 2 Analogue Outputs, 4 Digital Inputs and Clock/Reset Outputs.
Note 4: The %RH Software option is only available in the 2100-A4 and does not have PLC Retransmission Software. Refer to 2100-A4-HWD Section for more details.
Note 5:
Power supply 'H' is field selectable for 'M'; and 'M' for 'H'. Power supply 'L' must be ordered separately.
Terminals and Layout:
