Product Specifications:
Download Installation Schematic

The IN-LLT is a media compatible level transmitter specifically designed for continuous liquid level monitoring.
The transmitters are made from stainless steel with an internal mounted piezoresistive pressure sensor.
The IN-LLT is custom built to your specific requirements - see the Ordering Information below:
Note: The IN-LLT is also known as SLT-Submersible.

Level transmitter. Transmitter enclosed in a 316 SS envelope. Output; 4~20mA loop powered. For each metre greater than 10m. add per metre…. |
|
Model |
Description |
| IN-LLT-M | Transmitter; Jumo Midas (fixed range) Standard. Up to 100m. |
| IN-LLT-P | Transmitter; Jumo P30-504 (zero & spanadjustable). Standard. Up to 100m. |
| IN-LLT-F | Transmitter; Jumo P30-571. Flush diaphragm. Up to 100m. |
Level transmitter. Transmitter modified for hose adaptor. Output; 4~20mA loop powered. For each metre greater than 10m. add per metre…. |
|
Model |
Description |
| IN-LLT-J | Transmitter; Jumo P30-504. Standard. Up to 100m. |
| IN-LLT-JF | Transmitter; Jumo P30-571. Flush diaphragm. Up to 100m. |
| LPN-OVP (Rev 1) | We strongly recommend that an overvoltage protection device is
used with the IN-LLT if long runs of cable are involved in the installation; to protect against potential Lightning strike or earth potential rises. |
You may also like to consider using the Intech IN-LLT-C or the JUMO 4390 submersible level transmitters. Intech carries stock in many standard ranges as listed.
| Output | 4 to 20mA Loop Powered |
| Max Loop Resistance | 750 W |
| Accuracy | ± 0.5 ºC F.S. |
| Operating Temperature | 0~80ºC |
| Power Supply | 24Vdc |