Please select a product below:
The LPN-DP (Rev 1) Series Differential Pressure Transmitters provide a very cost effective solution for pressure applications that require high accuracy over very low operating pressure ranges.
The Intech IN-LLT (Rev 1) hydrostatic level transmitter is a fully sealed submersible pressure instrument. It is designed for liquid level measurement (Water Applications).
The sensor and electronics are housed within a stainless steel IP68 housing and provide end users with an Industrial 4~20mA loop powered or 0~5Vdc signal.
This over voltage protection unit is characterized by its high level of protection, concentrated in a compact space. The LPN-OVP (Rev 1) is suitable for installing in the narrowest of places, making it ideal for automated process industrial and building service systems.
The P-LCD is a handheld, high resolution (16 bit) pressure data logger with a liquid crystal display. The logger connects to an external gauge pressure sensor and also has an internal temperature sensor for convenient logging of ambient temperature if desired.
The logger accepts a range of pressure sensors from 100psi to 500psi.
The sensors are suitable for the measurement of liquid or gas pressure including difficult media such as contaminated water, steam and mildly corrosive liquids or gasses. The pressure sensor (with 500mm of cable) connects to a miniature connector socket on the
The P-LCD can be set to display the pressure in kPa, Bar or psi on the LCD screen. It can be set to display the pressure in Atmos, Bar, hPa, kPa, Pa, mBar, cm water, in Hg, in water, psi, mm water or mm Hg in the Omni7 software.
Pressure sensors available (All have 1/8 inch NPT thread and 500mm cable):
More information on the pressure sensor >>
Intech Instruments can custom build our LLT to match your exact specifications. The custom built IN-LLT is a media compatible level transmitter specifically designed for continuous liquid level monitoring.
Note: The IN-LLT was also known as the SLT-Submersible.
This pressure transmitter is used for measuring the relative (gauge) and absolute pressures in liquids and gases.
This pressure transmitter is used for measuring the relative (gauge) pressure in liquids and gases. For use when higher pressures are present.
Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases.
The high-precision, electronic pressure switch JUMO DELOS SI provides flexible application due to its switching outputs, analogue output and an LC display to visualise the process pressure and switching contact statuses.
This transmitter has a piezoresistive pressure sensor and can be used to measure differential pressure in dry, non-ionizing and non-aggressive gases. An optional LCD display can be added on with the connector system to display the pressure on-site.
Pressure and differential pressure transformers of the type 40.4304 are suitable to detect the over-, under- and differential pressure of non-aggressive gases.
The Midas DP10 differential pressure transmitter measures the pressure in liquid and gaseous media. The difference between the two pressures is converted into an analogue output signal.
The Maera (4390 Series) level probes are 2-wire 4~20mA submersible transmitters used for the hydrostatic measurement of levels in liquids.
Nivopress NPK / NCK level probes are 2-wire 4~20mA submersible transmitters used for the hydrostatic measurement of levels in liquids.
Nivopress NPK - General purpose (programmable range).
Nivopress NCK - Sewerage/Black water (fixed range).
The slimline (ø17mm) probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids.
The Roto-Bin-Dicator® is the most universal of all level sensing technologies and is the most popular level switch used in dry bulk materials. The Roto-Bin-Dicator® is a rotating paddle type, bulk material level sensor offered in a wide variety of paddle options for unequalled application versatility.
These devices convert a current or voltage input signal to a linearly proportional pneumatic output pressure. These versatile instruments are designed for control applications that require a high degree of reliability and repeatability at an economical cost.
Information on older Pressure and Level products that are no longer in production can be found here.