Related Products
Universal Input Indicator, DIN Rail Mount - with similar specs to the IN-uP4.

IN-uP4 (Rev 1) - Universal Input Indicator, Panel Mount:

Product Specifications:

Download Sales Brochure

Download (Rev 1) Installation Guide - Universal Power Supply

Download uP Configure Programming Software

Note: Requires the XU-USB (Rev 1) programming key.

 

Download Print Quality Image - 0.33MB.

IN-uP4
Click for large view

Description:

The IN-uP4 is a universal single input indicator, which makes interface with a wide range of sensors easy.
The IN-uP4 has a 4-digit LED display. An option to add two relay outputs (with two setpoint indicator LED’s), and one 4~20mA analogue output is available. The indicator (Rev 1) has a Universal Power Supply of 24~250Vac / 19.5~250Vdc.
Setup and calibration is simple, using ‘uP Configure’ software, with step-by-step instructions.

Features:

  • Universal Input with Indication.
  • Panel Mount.
  • Programmable via USB Port using uP Configure software and XU-USB (Rev 1) key.
  • Simple setup and calibration.
  • 4-digit LED Display.
  • Option to add Two Relay Outputs (with two setpoint indicator LED’s), and One 4~20mA Analogue Output.
  • Universal Power Supply of 24~250Vac / 19.5~250Vdc.
  • Sensor Power Supply for powering external Transmitter.
  • IP65.
  • Low Cost.

Ordering Information:

Code Description
IN-uP4   Universal Input Indicator with No Outputs.
IN-uP4X   Universal Input Indicator with Two Relay Outputs plus One 4~20mA Analogue Output.

Universal Power Supply of 24~250Vac / 19.5~250Vdc.

 

Note: The IN-uP4 Universal Input Indicator is pre-programmed for RTD Pt100 input as standard.

To program the IN-uP4 requires the XU-USB (Rev 1) Programming Key:

XU-USB (Rev 1)

USB Programming Key for programming IN-uP4 using uP Configure Programming Software (version 1.5.7 or later).
Note: XU-USB must be (Rev 1) or later! Older versions will NOT connect with the IN-uP4.

(Same Key as used for programming XU Series transmitters, 2400-A16, Z-2400-Sleeper, Z-2400-A2 Series and uP4-Din.)

 

PDF ICON Original IN-uP4 model Download:

IN-uP4 (Original) Installation Guide - HV and LV Power Supply options as below.

Note: The original IN-uP4 model had two different Power Supply options. Each indicator model type can be distinguished from the Power supply Connector plug as follows:

Model Connector Colour Power Supply Voltage
(Rev 1) Green Universal 24~250Vac / 19.5~250Vdc.
HV Orange 85~265Vac / 100~300Vdc.
LV Black 24Vac / 19~40Vdc.