Process Indicators:

Please select a product below:

  • IN-uP4IN-uP4 (Rev 1) - Universal Input Indicator, Panel Mount

    The IN-uP4 is a panel mount, universal single input indicator, which makes interface with a wide range of sensors easy.
    The IN-uP4 has a 4-digit LED display. An option to add two relay outputs (with two setpoint indicator LED’s) and one 4~20mA analogue output is available. The indicator has a Universal Power Supply of 24~250Vac / 19.5~250Vdc.
    Setup and calibration is simple, using ‘uP Configure’ software, with step-by-step instructions.

  • uP4-DinuP4-Din - Universal Input Indicator, DIN Rail Mount

    The uP4-Din is a DIN rail mount, universal single input indicator, which gives easy interface with a wide range of sensors. It is also fitted with two relay outputs (with two setpoint indicator LEDs), and one optional retransmission analogue output (4~20mA or 0~10Vdc selectable). The uP4-Din has a 4-digit LED front display, and a universal power supply of 24~250Vac / 19.5~250Vdc.
    Setup and calibration is simple, using ‘uP Configure’ software, with step-by-step instructions.

  • LPI-LCD-6LPI-LCD-6 - 4~20mA Panel Display

    The LPI-LCD-6 - 4~20mA panel display is ideal for displaying a variety of process variables, and is easy to scale to your required engineering units. 4~20mA Calibrator is NOT required!

  • LPI-LCD-5LPI-LCD-5 - Loop Powered Indicator

    This compact 5-digit 4~20mA loop powered indicator has effortless front-panel programming and simple, step-by-step calibration procedures (Requires 4~20mA Calibrator).




  • Indicators for Special Applications - on Request:

  • IN-PIN-P - Multifunction Indicator with relay output options

    The IN-P is a multifunctional indicator which not only interfaces smoothly with a wide range of PLC and monitoring systems, but also as a stand alone unit for single and multi input Indication - Alarm - Control.

  • IN-RIN-R - Large Display Tachometer Indicator with relay output options

    The IN-R is a technically advanced but cost effective microprocessor-based indicator designed specifically for use in tachometer applications. Options for up to four relay outputs make it ideal for stand-alone control or as a PLC interface. The large 4-digit display ensures that the figures can be easily read from a distance.

  • IN-RTIN-RT - Flow Rate Indicator with Totaliser and relay output options

    The IN-RT indicator is the ideal solution for a variety of flow rate application requirements.

  • IN-RTBIN-RTB - Flow Rate and Batching Controller with relay output options

    The IN-RTB controller is the ideal solution for a variety of flow rate and batching applications.