Tech Support:

To program the inputs and outputs on the 2100-A16-NET there are a number of preliminary tasks that must first be completed.

1. Configure the IP Address, Subnet Mask and Ethernet Port number of the 2100-A16-NET as required using the XPort® Installer software.

2. Install MicroScan V5 and Create an new Agent Job if not already configured.

3. Configure the 2100-A16-NET for MicroScan V5 interface mode by removing all jumpers from the on board S1-Function-Jumper.

4. Add the 2100-A16-NET to the MicroScan V5 interface.