uP Configure - IN-uP4 + uP4-Din + Z-2400-A2 Series Programming Software:

 

The uP Configure - IN-uP4 + uP4-Din + Z-2400-A2 Series Programming software has the following features:

  • Easy user programming using USB connection.

  • No power required while programming IN-uP4 or uP4-Din.

  • No calibration required after range has been programmed.

To use the uP Configure - IN-uP4 + uP4-Din + Z-2400-A2 Series Programming software an XU-USB (Rev 1) key is required.

XU-USB
XU-USB (Rev 1)

Installation Notes:

  • Ensure that the uP Configure - IN-uP4 + uP4-Din + Z-2400-A2 Series Programming software is installed before plugging in
    the XU-USB (Rev 1), as this ensures that the required Windows USB driver is installed first.
  • The XU-USB (Rev 1) plugs into a Standard size computer USB port.
  • When upgrading from a previous version - please disconnect the XU-USB (Rev 1) before installing.
  • The uP Configure - IN-uP4 + uP4-Din + Z-2400-A2 Series Programming software requires Microsoft .NET Framework 2.0 to be installed first
    (Microsoft .NET 3.5 SP1, which includes .NET 2.0, can be downloaded free).
  • An Administrator account or password will be required for installation. Contact your IT support for this if needed.
  • The XU-USB must be (Rev 1) or later! Older XU-USB versions will NOT connect with the uP4-Din or IN-uP4.

WARNING: Ensure that all programming is carried out BEFORE any wiring takes place!

 

Download Now - 40.6MB - December 12, 2016 - (Ver 1.6.4)